FlyCamOne2 Firmware
NEW FIRMARE RELEASED V4.01
This Update improves the synchronisation of Audio and Image. It's got the same functions as firmware 3.03
NEW FIRMWARE RELEASED V3
changes:
-"VL" and "SL" as additional recording modes in low resolution 320x240
-"Vd" and "Sd" for recording in dark environment
-"AR" for Audio recording
- Battery status in percent displayed "99" for full, "66" for 2/3 , "33" for 1/3 power and "CH" for charge...
- 180 Degree turned recording pressing shutter button a second time while "RY" is displayed
Installation instructions are included in the download.
---------------------------------------------------------------------
FIRMWARE VERSION 2.5
Please Note:
There are two different circuit board layouts which need different firmware.
Sothat your FlyCamOne² works correctly, you need identify your ver
sion of the FlyCamOne². You can do this with a visual inspection of the writing "1,3 Mega Pix" below thelens. Version A has a smaller gap between MEGA and PIX than version B .
sion of the FlyCamOne². You can do this with a visual inspection of the writing "1,3 Mega Pix" below thelens. Version A has a smaller gap between MEGA and PIX than version B .
V 2.5A / V2.5B
Enabled the external starts and stop of the FCO², integrates the modes "VL" and "SL" for video sequences in 320x240 pix
improved Indoor & WebCam quality.
Enabled the external starts and stop of the FCO², integrates the modes "VL" and "SL" for video sequences in 320x240 pix
improved Indoor & WebCam quality.
Download V 2.5B 16.01.08
Download V 2.5A 16.01.08
| < Prev | Next > |
|---|
